Collector Watches
October 23, 2026
Four Faces of a Masterpiece: Reading the Dials of the Patek Philippe 2499
By Splendore Journal·Edited by Mr. Sarumi
Across four series and 34 years, the dial of Patek Philippe’s reference 2499 evolved in numerals, scales and pushers. Here is how to read them.
The Perpetual Calendar Chronograph Perfected
Few references hold the place in collectors’ minds that the Patek Philippe 2499 does. Made from 1951 to 1985, it was the second generation of the manufacture’s serially produced perpetual calendar chronographs, succeeding the reference 1518 of 1941. Phillips puts total production at approximately 349 examples over those 34 years, a remarkably small number for a model that remained in the catalogue for so long.
Its proportions were generous for its time. Patek Philippe’s own magazine gives the case diameter as 37.7mm, at a moment when most men’s watches measured between 32 and 35mm. Inside was a 13 ligne chronograph movement based on a Valjoux ébauche, extensively reworked by Patek Philippe, which the manufacture continued to use until its remaining movement blanks were nearly exhausted in 1985. Its successor, the reference 3970, followed in 1986.
What makes the 2499 so absorbing for dial specialists is that its long life produced a sequence of distinct series. Each altered the dial, sometimes subtly and sometimes decisively, and each is now valued differently by the market. Learning to read those differences is one of the classic exercises of serious collecting.
Images: Phillips, Patek Philippe
The Dial
The layout of the 2499 dial never changed in principle. Day and month appear in twin apertures beneath twelve o’clock, the date is shown by a hand around the six o’clock register, which also frames the moon phase, and two subsidiary dials at three and nine record the chronograph minutes and the running seconds. What changed across the four series were the numerals, the outer scales and the pushers that frame the dial.
The first series, made from about 1951 to 1960, has square chronograph pushers, applied gold Arabic numerals and a tachymeter scale around the periphery. Phillips estimates that only about 48 first series examples were made across all metals. Specialists further distinguish two first series dial variants, known as Dial A and Dial B, and two case makers. The earliest cases, by Vichet, have elongated lugs and a flat caseback; later Wenger cases have a domed caseback and more compact lugs.
The second series introduced round chronograph pushers while retaining the tachymeter, and dials were made with either applied Arabic or applied baton numerals. It is a transitional series in which the watch begins to look more modern while keeping the instrument-like scale.
The third series removed the tachymeter. In its place came applied baton numerals and a fine outer seconds division. The dial becomes calmer and more open, and the moon phase and calendar indications gain visual space. Phillips catalogues of third series examples repeatedly draw attention to raised hard enamel printing for the signature and scales, a detail that rewards close inspection and is one of the markers of an original dial.
The fourth and final series, reference 2499/100, kept the baton numerals and outer seconds track but adopted a sapphire crystal, a practical modernisation that also changes how the dial reads under light.
Retailer signatures add a further layer. A small number of 2499 dials carry the name of the retailer who sold them, such as Beyer of Zurich, alongside the Patek Philippe signature. Calendar language is another variable: Italian calendar discs are recorded on both first and third series examples, and catalogues treat them as notable rarities.
In Context
The market follows the series closely. At Phillips Hong Kong in June 2021, a 1953 first series 2499 in yellow gold with a Wenger case, Dial B, Italian calendar and hard enamel signature sold for HK$15,375,000 against an estimate of HK$12,000,000 to 23,000,000. Phillips described it as the fourth known example with an Italian calendar.
Third series examples sit at a different level but remain serious watches. At the Phillips Winning Icons sale in New York in October 2017, a 1968 yellow gold third series 2499 sold for US$459,000. In Geneva in November 2020, a 1977 yellow gold third series example retailed by Beyer, with its box, certificate and original invoice, sold for CHF 705,600. Phillips noted that the original invoice, dated April 1978, recorded a price of CHF 15,700, and that the watch was the only known third series Beyer-signed example with an Italian calendar.
Patek Philippe’s present-day perpetual calendar chronograph, the reference 5270, continues the lineage with a manufacture movement introduced in 2011. The platinum 5270P-014 pairs a green lacquered dial with a black gradient rim and faceted white gold obus hour markers, a reminder that the manufacture still treats this complication as a canvas for dial design. Where the 2499 relied on twin apertures and a date hand alone, the modern reference adds round apertures for day and night and for the leap year cycle.
Reading a 2499 Today
For anyone assessing a 2499, the dial is the starting point but never the whole story. The series of the dial should agree with the pushers, the case maker and the crystal: square pushers belong with the first series, a sapphire crystal with the 2499/100. Archive extracts help confirm the date of manufacture and sale; the 1968 example sold in New York in 2017 was accompanied by one recording its original sale on 27 June 1968. Printing should be raised and crisp where hard enamel was used, and the moon disc, calendar discs and hands should share the same honest age. Small differences in the language of the calendar, or in the presence of a retailer’s name, can move a 2499 from rare to exceptional.
The Splendore Perspective
The 2499 teaches a lesson we hold close: a dial can evolve over decades without losing its identity, provided each change respects the underlying architecture. Moving from Arabic to baton numerals, or removing a scale, alters the character of a watch profoundly while the layout stays the same. Our bespoke dial work applies that same discipline, refining typography and finish within a watch’s existing geometry. Splendore Unique is independent of Patek Philippe.
Should you wish to explore how numerals, scales and finish could reshape a watch in your own collection, we would welcome you to design your dial with us.
Specifications
| Reference | Patek Philippe 2499 (fourth series 2499/100) |
| Production | 1951 to 1985, approximately 349 examples (per Phillips) |
| Predecessor and successor | Ref. 1518 (1941); ref. 3970 (1986) |
| Case | Around 37.7mm; Vichet cases early, Wenger cases later |
| Movement | Manual winding 13 ligne chronograph on a Valjoux base, reworked by Patek Philippe |
| First series | Square pushers, applied Arabic numerals, tachymeter; about 48 made |
| Second series | Round pushers, Arabic or baton numerals, tachymeter |
| Third series | Round pushers, baton numerals, outer seconds track, no tachymeter |
| Fourth series | As third series, with sapphire crystal |
| Phillips 2021 | First series, 1953, Italian calendar: HK$15,375,000 |
| Phillips 2020 | Third series, 1977, Beyer signed: CHF 705,600 |
Sources
Begin Your Commission
Every Splendore Unique dial begins with a private conversation about what it should mean to you.












