Bespoke Watches
November 4, 2026
Label Noir and Maurice Lacroix: How a Geneva Customiser Became a Manufacture’s Partner
By Splendore Journal·Edited by Mr. Sarumi
From a sell-out AIKON in 2020 to an online configurator, Label Noir’s work with Maurice Lacroix shows authorised customisation in practice.
Black as a Starting Point
Label Noir was founded in Geneva in 2011 as an independent label with a clear point of view. Its work revisits existing watch designs, most often in black and white, occasionally with a single accent of colour. The house describes black as a core value, the colour that brings all the others to life.
For much of the customisation world, the relationship with the original manufacturer is distant at best. Label Noir’s story with Maurice Lacroix has gone the other way. What began in 2020 as a reinterpretation of the AIKON, which Maurice Lacroix says sold out within minutes, has grown into a series of limited editions and, since December 2025, a permanent personalisation programme called The Lab.
Each step has been carried out with the manufacture rather than around it. That makes the partnership a useful case study in what authorised customisation looks like when it is built into a brand’s own catalogue.
Images: Label Noir
The Dial
Label Noir’s signature is restraint, and its dials show how much can be said with very little colour. The AIKON Automatic Skeleton 45mm Label Noir, limited to 100 pieces, is the clearest example. Maurice Lacroix specifies a sapphire dial with a translucent black varnish, so the movement remains visible as a shadowed presence beneath the surface rather than a fully exposed mechanism. A turquoise flange frames the dial, and the indexes are plated in matte black.
The colour is reserved for what matters most. The hands are turquoise-plated and filled with turquoise Super-LumiNova, so the one accent on the dial is also the part that tells the time. On the wrist, the effect is of a dark, layered surface with a thin ring of colour and two bright hands moving across it.
The MASTERPIECE Skeleton Label Noir of 2024 takes the opposite route to the same end. Here there is almost no dial at all. The hand-wound Manufacture ML134 calibre is openworked, with Grand Colimaçon decoration and sand-blasted surfaces, and the whole is coated in what Maurice Lacroix describes as black and anthracite matte DLC. Matte black-plated hands with white Super-LumiNova provide the legibility, so the reading of the time depends on contrast against a dark, architectural background.
The Lab brings these ideas to individual collectors. On the configurator for the AIKON Automatic 42mm, Label Noir presents dial finishes including laser, satin and microgroove treatments, alongside choices of case material, hands and strap. WatchPro reports that collectors can begin from presets curated by Label Noir or work in a free design mode.
The common thread is that the dial is treated as the place where a reinterpretation is won or lost. A new case coating changes the mood of a watch. A new dial changes its character. Label Noir’s best work keeps the original design recognisable while shifting the emphasis through texture, translucency and a very controlled use of colour.
In Context
The distinction between authorised and independent customisation matters to collectors, and the Label Noir pieces fall clearly on the authorised side. The limited editions are Maurice Lacroix references, listed on the manufacture’s own website with full specifications. The MASTERPIECE Skeleton Label Noir, reference MP7228-DLB04-090-2, carries a two-year warranty on the Maurice Lacroix page. For The Lab, Label Noir states that each watch is Swiss made and carries the Maurice Lacroix official two-year warranty.
This is different from independent modification, where a watch is altered after it leaves the manufacturer, by a specialist that has no agreement with the brand. Independent work can be of a very high standard, but the manufacturer’s warranty and servicing terms may no longer apply in the same way, and some brands may replace non-original parts when the watch is serviced. An authorised programme avoids that question because the finished watch is the manufacturer’s own product.
Maurice Lacroix is not alone in opening its doors to an outside design voice. Several houses have formalised relationships with customisers in recent years. What sets The Lab apart is permanence: rather than a single drop, it offers ongoing personalisation through the manufacture’s own channel.
From Limited Edition to Configurator
The partnership has evolved in clear stages. The 2020 AIKON proved there was an audience. The MASTERPIECE Skeleton Label Noir, announced on 19 March 2024 and limited to 288 pieces, brought Label Noir’s palette to a manufacture calibre. The AIKON Automatic Skeleton 45mm Label Noir followed at the end of 2025, limited to 100 pieces, with the in-house ML234 automatic movement and a 50-hour power reserve.
The Lab, also launched in December 2025, changes the model. Its base is the AIKON Automatic 42mm in stainless steel, with the automatic ML115 calibre, a 38-hour power reserve and 20 ATM water resistance. Label Noir shows case options in stainless steel, titanium, PVD and ceramic, and quotes delivery in six to eight weeks.
For collectors, the practical difference is significant. A watch configured through The Lab is ordered, built and delivered as a new Maurice Lacroix rather than modified after purchase, so its papers, warranty and service history begin with the manufacture. The individuality comes from the design choices, not from any change made afterwards.
The Splendore Perspective
Label Noir and Maurice Lacroix show that personalisation and authenticity need not pull in opposite directions. When the design voice and the manufacture work together, the collector gains individuality without uncertainty over warranty or provenance. It is a model built on transparency, and transparency is what gives any personalised watch its lasting value.
At Splendore Unique, the dial is where our own work begins. We design bespoke dials and personalised watches as an independent house, and we are always clear about what that means for the base watch. If a quieter palette, a single accent of colour or a dial entirely of your own appeals, explore what is possible with Design My Dial.
Key Facts
| Customiser | Label Noir, Geneva (founded 2011) |
| Partner | Maurice Lacroix |
| First collaboration | AIKON Label Noir, 2020 |
| MASTERPIECE Skeleton Label Noir | Ref. MP7228-DLB04-090-2; 43mm DLC-coated steel; hand-wound ML134; 45-hour reserve; 288 pieces; CHF 6,900 |
| AIKON Automatic Skeleton 45mm Label Noir | Ref. AI6028-DLB0B-030-H; black DLC steel; sapphire dial with translucent black varnish; ML234; 50-hour reserve; 100 pieces |
| The Lab | Online configurator for the AIKON Automatic 42mm (ML115, 38-hour reserve, 20 ATM) |
| Case options (The Lab) | Stainless steel, titanium, PVD, ceramic |
| Delivery (The Lab) | 6 to 8 weeks |
| Warranty | Maurice Lacroix official two-year warranty |
| Status | Authorised manufacture collaboration |
Sources
Begin Your Commission
Every Splendore Unique dial begins with a private conversation about what it should mean to you.












